Products

Toray MicroPly™ TC310 is a toughened epoxy film adhesive with excellent mechanical properties and toughness. It is ideal for honeycomb or laminate bonding and may be cured in either autoclave or vacuum bag processing.

Toray MicroPly™ TC263 is a toughened, high peel strength, structural epoxy film adhesive for honeycomb core and laminate bonding. It may be used in low pressure vacuum only, out-of-autoclave processes or in autoclave processes at 15 psi.

Toray MicroPly™ SF-5 is a cyanate ester based syntactic film with compatibility to various cyanate ester matrices, including troray RS-3. It is available in unsupported and supported continuous film form in thicknesses from 0.25–6.35 mm (10–250 mils).

Toray MicroPly™ EX-1541 cyanate ester syntactic foam is unique due to its extremely low density and good structural properties. It does not require pressure during cure to achieve it mechanical properties and is easily machined to shape if required.

Toray MicroPly™ EX-1516 cyanate ester film adhesive which has been formulated for low moisture absorption and / or low dielectric constant and loss applications. It provides strength and toughness when bonding solid, honeycomb or foam core structures.

Toray Cetex® TC940 is a high strength semi- crystalline polyethylene terephthalate (PET) thermoplastic composite designed for applications requiring high impact strength at good value, such as recreational equipment.

Toray Cetex® TC910 is a high strength thermoplastic composite using a polyamide 6 (PA6) matrix resin designed for applications such as automotive and transportation. It provides good heat distortion temperatures and excellent solvent resistance.

Toray Cetex® TC1225 is a high-end thermoplastic composite material, utilizing a semi-crystalline low-melt polyarlyetherketone resin with excellent mechanical performance and lower processing temperatures.

Toray Cetex® TC1005 is a thermoplastic composite prepreg designed to deliver an outstanding balance of performance and value.

Toray Cetex® TC1000 Design is a cost-effective, high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU).

Toray Cetex® MC1322 PEKK is a thermoplastic BMC based upon TC1320 UD tape using high strength fibers in lengths of up to 25.4mm (1"). MC1322 allows complex shapes to be made with varying wall thickness, integrated ribs and reinforcing structures.

RS-8HT is a BMI resin which provides excellent elevated temperature properties and processability. RS-8HT has been evaluated and qualified in the areas of satellite and airframe / missile structures.

RS-50 is a toughened low viscosity epoxy RTM resin which can be used in wet winding, RTM and VARTM processing. RS-50 has a long four hour pot life.

RS-16 is a two-part low viscosity cyanate ester RTM resin for wet winding, RTM and VARTM processing. RS-16 is intended for lower temperature exposure and is an ideal system when used with different materials limiting the upper cure temperature.

MS-1H is carbon fiber / epoxy resin compression molding system using high modulus PAN carbon fiber. MS-1H is an excellent high stiffness BMC, qualified to military and commercial applications MS-1H is offered with 1” or ½” carbon fibers for smaller parts.

EX-1545 is a toughened two-part cyanate ester resin with extremely low viscosity at room temperature, allowing RTM to take place with minimal resin heating. This facilitates mold filling time for difficult and / or large RTM’d structures and reduces waste.

E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. E760 has been designed for use in mechanically demanding structural applications exposed to elevated temperature environments e.g. Formula 1.

E750 is a toughened epoxy component prepreg developed for structural applications within Formula 1 and high performance automotive. E750 allows curing from 80°C (176°F) to 180°C (356°F) and can be impregnated into a range of fiber and fabric types.

E731 is a toughened epoxy component prepreg designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The E731 resin formulation ensures that components are free from white-spots and exhibit high clarity.

E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural applications in motorsport and marine industries and, a wide range of engineering applications.

E721-FR is a 120°C (248°F) cure modified epoxy prepreg of medium viscosity. E721-FR offers excellent structural properties, flame retardancy and exceptional toughness allowing direct lamination to honeycomb without the use of a film adhesive.

E720 is a 120°C (248°F) cure toughened epoxy prepreg. E720 offers excellent adhesive properties, allowing direct lamination to honeycomb without the use of a film adhesive.

BT250E-1 is a 121°C (250°F) cure epoxy prepreg with excellent toughness and strength. It provides an outstanding surface finish with VBO. BT250E-1 is self-adhesive to honeycomb and foam core and, is MIL-R-9300 qualified.

8020-FR is a modified epoxy component prepreg offers excellent structural properties, flame retardancy, and toughness. The Toray 8020-FR resin system has been developed to offer a long out life and flexible cure schedules from 70–120°C (158–248°F).

8020 toughened epoxy component prepreg offers an excellent balance of mechanical properties and excellent surface finish. The Toray 8020 resin system has been developed to offer a long outlife and flexible cure schedules from 70-130°C (158-266°F).